Product Overview
A custom ceramic tube is produced to a buyer's drawing when a standard tube will not fit the space, does not meet the material requirement, or does not have the end structure the assembly needs. It is used in non-standard equipment insulating tubes, custom furnace tubes for high-temperature furnaces, ceramic pipes for special operating conditions, and verification tubes for R&D.
How the Material and Forming Route Are Chosen
The drawing is reviewed first. From there, the material is selected against the operating conditions: 95%–99% alumina, steatite, or zirconia. Steatite covers up to 1100°C, alumina to 1600°C, and zirconia is chosen where higher toughness is needed. Then the forming route is selected against the geometry: dry pressing, slip casting, or isostatic pressing. The firing process and the finishing route follow from that.
This sequence is done before a price is quoted, not after, because the forming route is what determines the tooling cost.
|
Item |
Range |
|
Material |
95%–99% alumina / steatite / zirconia |
|
Forming method |
Dry pressing / slip casting / isostatic pressing |
|
Operating temperature |
1100–1600°C (by material) |
|
Volume resistivity |
10¹²–10¹⁴ Ω·cm |
|
Dimensional tolerance |
±0.05 mm (machined) |
|
MOQ |
Sample orders flexible / batch quantity by agreement |
What to Send
Provide the drawing with dimensions, tolerances, material requirement, and the operating conditions, including temperature, voltage, atmosphere, and any corrosive medium. If a sample of the existing part is available, sending it helps confirm the fit. The material and forming route are confirmed against these inputs before quoting.
Applications
Non-standard equipment insulating tubes
01
Custom furnace tubes for high-temperature furnaces
02
Ceramic pipes for special operating conditions
03
Verification tubes for R&D
04
FAQ
Q: What information do you need to quote a custom ceramic tube?
A: Provide the drawing with dimensions, tolerances, material requirement, and operating conditions, plus the quantity needed. If a sample is available, sending it helps confirm the fit. Temperature, voltage, and atmosphere should be stated so the material can be checked against them.
Q: What is the lead time for a custom ceramic tube?
A: Sample lead time is typically 2–3 weeks. Batch orders ship on a standard one-month lead time. The exact schedule is confirmed at the engineering review stage.
Hot Tags: custom ceramic tubes, China custom ceramic tubes manufacturers, suppliers, factory, Ceramic Massage Head, Ceramic Parts, industrial ceramics, Porous Ceramic Tube, Silicon Carbide Tubes, Silicon Nitride Thermocouple Protection Tube






