Alumina Ceramic Spacer

Alumina Ceramic Spacer
Details:
An alumina ceramic spacer is used where a component needs to be insulated from a metal surface and the heat generated by that component has to be conducted away at the same time. It is installed between power devices such as IGBTs and MOSFETs and their heatsinks, in power modules, in high-voltage equipment, and at electronic component mounting points.
Send Inquiry
Download
Description
Technical Parameters

Product Overview

An alumina ceramic spacer is used where a component needs to be insulated from a metal surface and the heat generated by that component has to be conducted away at the same time. It is installed between power devices such as IGBTs and MOSFETs and their heatsinks, in power modules, in high-voltage equipment, and at electronic component mounting points.

 

Why One Part Replaces Two

A plastic spacer insulates but does not conduct heat, so the device runs hotter. A metal spacer conducts heat but needs a separate insulating layer. The alumina spacer is both the insulator and the thermal path.

 

Item

Value

Material

95%–99% alumina

Thermal conductivity

20–30 W/m·K

Volume resistivity

> 10¹⁴ Ω·cm

Breakdown strength

≥ 20 kV/mm

Thickness

0.5–10 mm

Shape

Round / square / profiled (per drawing)

The thermal conductivity value depends on alumina purity. Higher purity gives higher conductivity, and also higher volume resistivity. If the application is thermally limited, specify the purity against the required conductivity rather than defaulting to the lowest-cost grade.

 

Thickness Selection

Thermal resistance rises with thickness, so the thermal path should be as short as the voltage allows. Thin spacers (from 0.5 mm) are used where the thermal budget is tight. Thicker spacers (up to 10 mm) are used where the voltage requires more insulation distance. The thickness is selected against the voltage and the thermal budget together, not against one of them alone.

 

Flatness and the Thermal Path

A spacer that is not flat will leave an air gap between the device and the heatsink, and an air gap adds thermal resistance. The faces are ground for flatness and parallelism so the spacer makes full contact on both sides. This is what makes the thermal conductivity figure meaningful in the actual assembly rather than only on the data sheet.

 

Applications

Insulation and heat dissipation for IGBTs and power modules

01

Insulation between power modules and heatsinks

02

Insulating spacers in high-voltage electrical equipment

03

Insulation at electronic component mounting points

04

 

FAQ

Q: How does alumina purity affect the thermal performance?

A: Thermal conductivity rises with alumina purity, and the range across our 95%–99% grades is 20–30 W/m·K. Higher purity also gives higher volume resistivity. If the application is thermally limited, specify the purity against the required conductivity rather than defaulting to the lowest-cost grade.

Q: Can you supply a spacer that matches a specific device footprint?

A: Yes. Provide the device footprint, the mounting hole pattern, and the required insulation thickness, and we will produce the spacer to that outline. The cutout positions are held to the drawing.

 

 

Hot Tags: alumina ceramic spacer, China alumina ceramic spacer manufacturers, suppliers, factory, ceramic electrical connection components, Ceramic Protection Tube, Ceramic Sheath Tube, Ceramic Thermocouple Protection Tubes, Ceramic Thermocouple Sheath, electronic ceramics

Send Inquiry