Product Overview
An alumina insulator bushing is a ceramic insulating component used where a conductor passes through a metal housing, panel, or enclosure and must remain electrically isolated from it. It is installed in transformers, switchgear, distribution cabinets, variable-frequency motors, EV charging piles, and industrial power modules. The bushing carries the conductor mechanically while blocking current leakage between the conductor and the surrounding metal structure.
Why This Bushing Fits High-Voltage, High-Temperature Assemblies
Insulation holds at 6000V and below without breakdown. The ceramic body is sintered above 1550°C from 95%–99% alumina, giving a volume resistivity above 10¹⁴ Ω·cm and dielectric strength of 18 kV/mm or higher. In a 6000V circuit, the wall thickness required for safe clearance is therefore smaller than what plastic or rubber bushings need, which matters when the enclosure has limited internal space.
No moisture absorption, no swelling. Alumina does not take on water. In humid, oily, or washdown environments, the insulation resistance stays at its dry value instead of drifting downward as nylon or epoxy bushings do. This is the reason the bushing is specified in outdoor distribution cabinets and charging infrastructure rather than only in climate-controlled rooms.
Wall thickness and bore finish are controlled as separate dimensions. Uneven wall thickness causes the conductor to sit off-center, which changes the effective creepage path. The bore is machined so the conductor or threaded rod passes through without binding. Both dimensions are checked per batch, not sampled from a single reference piece.
Continuous operating temperature up to 1250°C. The bushing does not soften, creep, or deform at temperatures that would destroy polymer insulators. In motors, transformers, and industrial power modules where heat is continuous rather than intermittent, this removes the thermal derating that plastic bushings require.
Applications
Conductor insulation in transformers and switchgear
01
Wall-through insulation in distribution cabinets and variable-frequency motors
02
Insulating components in EV charging piles
03
Insulation protection in industrial power modules
04
Specifications
|
Parameter |
Range |
|
Material |
95%–99% alumina (Al₂O₃) |
|
Dielectric strength |
≥ 18 kV/mm |
|
Volume resistivity |
> 10¹⁴ Ω·cm |
|
Continuous operating temperature |
1250°C |
|
Inner diameter |
3–60 mm |
|
Outer diameter |
8–100 mm |
|
Length |
10–300 mm |
|
Structure |
Straight / flanged / stepped |
|
Surface |
Glazed / unglazed |
Standard configuration: straight tube, unglazed, dimensions within the ranges above.
Custom range: flanged and stepped structures, glazed surface, non-standard ID/OD/wall thickness combinations per drawing.
OEM/ODM
We machine alumina insulator bushings to customer drawings. The ID, OD, wall thickness, and flange geometry are set by the drawing rather than by a fixed catalog. In-house CNC grinding is used for bore and end-face finishing, which reduces the amount of secondary machining the buyer has to arrange after delivery. Sample lead time is typically 2–3 weeks; batch orders ship on a standard one-month lead time.
Customizable Items
• Inner diameter
• Outer diameter
• Wall thickness
• Flange structure
• Stepped profile
• Surface finish (glazed / unglazed)
• Length
Quality Control
Each production batch is dimensionally inspected before packing. The inspection covers bore diameter, outer diameter, wall thickness variation, and overall length against the drawing. Insulation performance is verified by sampling from the batch rather than from a single reference unit, so the reported dielectric strength reflects the batch rather than one hand-picked piece.
Because alumina is brittle, the bushing is checked for edge chipping and micro-cracks at the bore ends, where conductor insertion creates the highest stress concentration. Bushings that fail the visual crack inspection are removed before the electrical test, not after.
The factory has produced industrial and precision ceramic parts since 2002. Dimensional and insulation records are retained per batch, and the ISO 9001 system covers incoming raw material through final delivery.
FAQ
Q: Can the bushing be supplied with a glazed surface for outdoor use?
A: Yes. Glazing is available on the outer surface. A glazed surface sheds water and reduces surface contamination buildup, which helps maintain creepage distance in outdoor cabinets. Bore surfaces are normally left unglazed to keep the conductor fit consistent.
Q: What tolerance can you hold on the inner diameter?
A: Standard bore tolerance follows the drawing requirement. For precision assemblies, the bore can be finish-ground after sintering. Send the drawing with the required ID and fit, and we will confirm whether the tolerance is achievable for that bore size and length.
Hot Tags: alumina insulator bushing, China alumina insulator bushing manufacturers, suppliers, factory, ceramic electrical connection components, Ceramic Protection Tube, Ceramic Thermocouple Protection Tubes, Ceramic Thermocouple Sheath, electronic ceramics, G9 Ceramic Lamp Holder


